6 Rookie Mistakes You Shouldn’t Do When Building Your First Gaming Computer

Building your first gaming computer is not as complicated as many people perceive it to be. The process is easy when you have the right materials, procedures, and experience. However, just like any other process, things can go wrong if you aren’t careful or ignore some processes. You might have built a successful unit, but a mistake or two might cost you the whole process, making the project go to waste. Many mistakes can be rectified; it’s always advised to know them first before building your first machine. Here are some mistakes you should avoid at all costs.

1.   Having Incompatible Hardware

One main mistake that you can make and cost you the whole process is getting incompatible hardware. You can build your gaming computer to the last stages, but your computer might fail to work or function as required if you fail to install the right hardware. Incompatible hardware might include a CPU that doesn’t go with the motherboard or buy something more significant that can’t fit with other components. It’s advised to do some research on the hardware before buying them and see if they can fit. You have to get the right hardware, the correct power consumption units’ storage drives, screens, and any other hardware you will require in your build.

2.   Forgetting the Plastic Cooler Cover

In every CPU, there is a plastic cover that monitors the CPU cooler’s thermal paste, which prevents it from getting everything. If you aren’t sure about it, you need to open your cooler and check it out. Ensure it’s removed. Other than resulting in inadequate cooling, the plastic cover can melt and damage your gaming PC, making you start again with the process. Such cover is also present in new computers, where buyers get advised to remove the plastic before use. You can get some good aftermarket CPU cooler, which comes with easily visible covers, which you can’t miss to see and remove before installation. If you purchase a second-hand cooler, ensure you add a thermal paste before installation. Also, do not forget plugging the cooler in.

3.   Installing the CPU Wrongly

Installing the CPU components incorrectly is a common mistake by several people trying to build their gaming PCs. For most people, as long as the CPU is working, they are okay with it, not knowing that there are right procedures to be followed. Processors need to be installed on a specific orientation to ensure they work well as required. Most processors have a mark at the end. When you check the AMD desktop processors, their marking is at the bottom left corner. The marking should line up with the CPU’s socket indicator, mostly located on the load plate or the part that holds your CPU down. At times, you may find this indicator on the board. Ensure the CPU components are fixed correctly to ensure the smooth running of your PC.

4.   Forgetting the Power Connection

There is nothing as disappointing as installing your CPU fully, and it fails to work after everything is set. According to statistics, at least half of new CPU builders end up forgetting to connect the power components in their CPU, which turns to be a disappointment in the end. Where is the CPU power connection found? In most cases, the CPU power connection is located at the motherboards top-left. Failing to connect this power unit will make your CPU fail to function when you most want it. To find out where the power connection is, check out a six or 8-pin connection required from the SPU or labeled cpu_pwr.

5.   Fixing the RAM Wrongly

Failing to fix your RAM well or not making it sit well in your computer might create more issues than expected. Fixing the RAM wrongly might affect it to pair with dual channels or fail to go into the dedicated slot. To ensure that the RAM fits correctly, make sure that the pins align correctly with the CPU. If they don’t align, you should check for the right one. Ensure everything fits in properly before going to the next process. How do you make sure it fits well? Make sure you push it until you hear the click sound after it settles in. If not, remove it and try again.

6.   Poor Connection Between Components

Other mistakes people make when building up their gaming computers include forgetting to connect an HDD or SSD, failing to secure the front panel, and connecting the monitor into the motherboard and not the graphics card as required. Ensure everything clicks on when connecting to give assurance.

If your gaming CPU fails to power on or works with issues, try to check it out and see where you went wrong, using the above list. Knowing where you went wrong acts as an experience when building your next gaming PC.

Written by
I am the owner of ThisGenGaming.com

Have your say!

0 0

Lost Password

Please enter your username or email address. You will receive a link to create a new password via email.